|
PATRONAGE
|
SPONSORS
|
|
Provisional List of Papers
CFD
| Extraflame |
Thermo-fluid Dynamics analysis of pellet stove cast iron heat exchanger |
| CFD Engineering |
Analisi CFD non stazionaria di una valvola di ritegno |
| Gambro Dasco |
CFD application for new components design |
| ANSYS Germany |
In-cylinder Simulation of a Spark-ignition High Performance Motorbike Engine with ANSYS CFX |
| Università degli Studi di Catania |
Modello fluidodinamico 3D per la progettazione e l’ottimizzazione di Turbine Eoliche |
| EnginSoft |
New trends in CFD solution time with high density, new generation CPU's |
| Alenia |
Surge Pressure Analysis in Aircraft Refuelling System |
| Nuovo Pignone |
Ejectors in a compressible network for gas turbine extended operability |
| Centro Sviluppo Materiali |
Multi scale approach for walking hearth reheating furnaces simulation |
| ENDIF - Engineering Department in Ferrara |
Analisi numerica di un combustore tubolare di microturbina a gas alimentata con gas di sintesi |
| Piaggio & C. |
The use of ansys/cfx to optimise the cooling circuit of an internal combustion engine |
| Fiat Group Automobiles |
Hydraulic matching of an engine cooling system for automotive application in advanced engineering |
| Tetrapak |
Interaction of turbulent flows with packaging material for forming and design of food containers |
| Magneti Marelli |
Internal combustion engine simulation in Magneti Marelli |
FEM
| Università di Pisa - Dipartimento Ingegneria dell'Informazione |
Design of metamaterial based devices for electromagnetic applications |
| Enea |
A Software Platform for the assessment and the optimization of IVVS viewing performances |
| Piaggio & C. |
Dynamic simulation of a starter support |
| Ferrari |
Analisi termica e dinamica per valutare gli effetti isteretici sulla risposta di uno smorzatore torsionale |
| Lamborghini |
Simulazione dei parametri di scambio termico nell'accoppiamento valvola guida per ottimizzazione dei giochi |
| MBDA |
Il valore aggiunto dell'uso delle analisi esplicite nel settore della difesa |
| Pierburg |
Analisi di installazione e chiusura di una tenuta per depressori automobilistici |
| ST Microelectronics |
Electro-Thermal-Structural Analysis on a Power Device |
| Tetra Pak |
FEM Analysis of Induction sealing of multilayered packaging materials |
| Università di Trento |
FEM tool for the modeling of mechanical dissipations in multilayer coatings |
| INFN |
The design of windows for Xenon calorimeter |
| Piaggio & C. |
CAE analysis of a rear suspension arm for bike application |
| SAES Getters |
Modeling of Shape Memory Effect (SME) in ANSYS |
| Politecnico di Bari |
Experimental and numerical analysis of beverage’s cans subjected to thermal shock |
PIDO
| ENI |
Early diagnosis of upstream Oil & Gas Flow Assurance problems by integrating modeFRONTIER with a transient multiphase fluid dynamic simulator |
| University of Magdeburg |
Optimization of Savonius Turbines after improving the k-ε Turbulence Model in
modeFRONTIER |
| Continental |
Multi Objective Optimization of Common Rail System Components |
| Ferrari - Università di Bologna |
Development of a numerical methodology for the optimization of the exhaust flow of an high-performance engine |
| Piaggio & C. |
Kinematic optimization of the distribution system in 4-Stroke engine by means of modeFRONTIER |
| Umbra Cuscinetti |
Multi-disciplinary optimization approach in the design of actuator for active vibration control system |
| Barresa in collaboration with Polimi |
Virtual Corporate strategy: Decision makinfg support and solutions |
| Continental |
Multi-objective performance Optimization of a Solenoid Direct Injector for Gasoline Applications |
| Thales Alenia Space |
Multi-objective Optimization for Double Linear Polarized Slotted Waveguide Antenna |
| EnginSoft Nordic |
Multi-objective optimization of a MIMO antenna system using modeFRONTIER |
| Zenergy Power |
Multi-Objective design optimization of a Superconducting Fault Current Limiter |
| ESTP Cachan |
Modeling and Optimization of an urban flow network with a Multicriteria Approach |
| Cranfield University |
MEMS Design Optimisation: The Case of Energy Harvesing Devices |
| University of Naples |
A Nash Equilibrium-Genetic Algorithm optimization code for structural problems. Test case: an aluminum plate subjected to low velocity impact events |
High Frequency
| High Frequency and Signal Integrity products: new features and roadmaps |
| HFSS in Ansoft Designer for Spiral Inductors, Package Modeling and MMIC Application/Demo |
| The Short Range Wireless Communication Channel Methodology |
| Full System EMI/EMC Analysis |
| Antenna co-site simulation |
| Capacitor Optimization for Package and PCB Power Delivery |
| Productivity Tools for HFSS: Increasing Speed and Size with DSO and HPC |
FORGE Italian Users' Meeting
| TU Chemnitz |
Simulation of the planetary cross rolling process for the production of seamless tubes with FORGE |
| DIMEG - University of Padova |
Modelling of the Mannesmann effect |
| Zucchetti Mario |
La simulazione dello Stampaggio a Caldo di Leghe non ferrose con FORGE |
| FEAT Group |
Studio per evitare la formazione di ripieghe di stampaggio su corpo valvola a
membrana in acciaio inox |
| Nuova Ofar |
La simulazione del processo di forgiatura a stampi aperti: esempi di utilizzo in OFAR |
| Asfo |
FEM study on the forging and ring rolling process of an aeolian transmission joint |
| Aachen University |
Virtual tool set-up of multi-stage forging processes by coupled simulation |
Read the Paper list of the past editions |
